
mr
.
steam
®
Controls
__________________________________________________________________
12
8:19 AM
HOME SAVECANCEL
PASSCODE
12345
6
CLEAR
Enter your Passcode
Passcode Lock
78910
0000
OFF
ON
OFF
ON
Enable WiFi
12:05 AM
HOME SAVECANCEL
AUTOSTART
SUN MON TUE WED THU FRI SAT
OFF
12 05 AM
:
12:05 AM
HOME SAVECANCEL
AUTOSTART
SUN MON TUE WED THU FRI SAT
OFF
12 05 AM
:
STOP
Continue
12:05 AM 80˚
Settings > Passcode
The Passcode feature can help prevent unintentional use of the
steambath. Please refer to the steam generator
Installation, Operation and Maintenance manual (PN 100472) before
using the steam bath. The Passcode feature cannot insure uninten-
tional use of the steambath.
Enter a 4 digit passcode using the keypad. Press the passcode lock
button ON under the 4 digit code to turn the passcode lock on.
Press SAVE to store the passcode. The next time the iSteam 2.0
®
control is turned on the user will be prompted to enter the pass-
code. Press CANCEL to exit without storing the passcode lock.
If you forget your passcode, power should be turned off at the cir-
cuit breaker. After 1 minute turn the breaker back on. The passcode
lock will automatically be turned OFF.
To enable WiFi on your iSteam 2.0 so you can use the iSteam 2.0
app, slide the Enable Wi-Fi switch to ON
AutoStart
™
AutoStart will automatically turn the steam gen-
erator on at your preset time. Activating the steam in an occu-
pied room may subject persons to the hazards described in this
manual. Only activate the steambath if the steam room door is
closed. Activating or using the steambath with an open door
may cause property damage or injury to persons outside of the
steam bath.
The AutoStart feature can be used to turn on the steambath at a
predetermined time. Select the day(s) of the week and the time
of day you would like to turn the steam bath on. You can also set
the ChromaSteam
®
and AromaSteam to turn on.
To activate AutoStart, slide the switch to the ON position and
press save. When AutoStart is armed you will see a in the
upper right corner of the screen.
When AutoStart starts your steambath it will allow the steambath
to run for only 10 minutes. To continue steam bathing press the
continue button. If the continue button is pressed, AutoStart will
remain active for the next scheduled start time.
To stop the steam bath press the stop button.
If the ON button is pressed within 10 minutes the steambath
will turn off. If the STOP button or 10 minute time out turns the
steam generator off, AutoStart will automatically be deactivated.
WARNING
!
Kommentare zu diesen Handbüchern